Work Trends Guaranteed to Change in 2015

Today freelancers have gained recognition as a viable segment of our workforce. As the freelancing community grows by leaps and bounds, the USA alone is home to over 17.7 million independent workers whose estimated income goes over $1.17 trillion. The story is very similar in other parts of the globe, as more and more international organizations turn towards hiring freelancers from developing countries to cut down on costs without compromising on high quality work. So, what does that tell us about the future of freelancing?

Freelancing: A Rising Trend for Years to Come

The Freelancers Union in the USA is fighting to be recognized as a sustainable part of the work force. “Counting workers based on a work setup that’s disappearing is cheating everyone involved. Instead of focusing on whether someone’s job is full-time or part-time, how about asking if they have enough work to sustain a life? Recognizing freelancers will help build out better support infrastructure, such as freelancer group insurance plans. It will also ensure accurate employment numbers, delivering more precise profiles of overall economic growth and strength — vital statistics that influence policy decisions from the national to the local level. We must support this massive community by updating how we officially measure employment”, says Sara Horowitz of the Freelancers Union in an official interview with New York Times.

The organization behind International Freelancers Day conducted a study to shed light on Freelance Industry Report in 2012. According to the report, over 26% of any average organization’s workforce was contract based or contingent in May 2012. And it is expected that the numbers will rise to become almost 30% to 50% of all workforce in USA within a few years.

A recent study establishes that freelancing will be at the top of new career trends in 2015. Voluntary job quitters will rise in numbers, as more and more careers will be launched virtually. It’s also speculated that careers in 2015 will be more people focused, rather than being ‘tech-focused’, as the trend has been since the beginning of the new millennia.

More Serious Professionals Are Now Successful Freelancers

Many of us believe that professionals thrive on a 9-to-5 routine. They prefer the luxury of predictability and hate to undertake any potential risks when it comes to their careers. But is that really truly? Apparently not! Several professionals from all parts of the globe have taken the leap to branch out on their own and become freelancing contractors with a flourishing career that is nothing short of noteworthy. And it isn’t just designers, writers and photographers that prefer to become their own boss; you will find an equal number of specialists – be it teachers, corporate trainers, data analysts, and IT professionals. Freelancing opportunities are growing in each and every industry, and there are many success stories that inspire hundreds of others to quit the shackles of their confining jobs and turn their passions in to their full-time careers.

According to a report conducted by Kingston University for PCG in the UK, there is a 12% growth in professionals who choose to be self employed. 1 out of 3 companies use freelance contractors every week, and 41% of all UK based organizations plan to use more freelancers over the coming years. John Brazier, the Managing Director for PCG says, “The findings of the report prove that freelancing is now one of the cornerstones of the UK economy. It shows that even in these tough economic situations, the ability to be flexible is critical for both individuals and businesses looking for more work. Freelancers now account for 6% of UK’s entire workforce, and hence it has become a significant constituency that deserves new policy making at government levels.”

And it isn’t just the younger generation around the world that is taping in to the potential of freelance opportunities. 43- year old Maneesh Konkar from Mumbai is a freelance trainer, who conducts sales workshops for MNCs. He has worked with an impressive array of clients ranging from FMCG companies, IT companies, Auto companies and even Consumer Goods manufacturing brands. “I prefer to freelance because I can grab job opportunities in literally any part of the world, rather than being restricted to one organization or a city. It gives a lot of flexibility to my job and allows me to be my own boss”, says the expert trainer.

So give up your inhibitions and embrace the new trend! However, bear in mind; while freelancing might offer you a lot of flexibility to work in a fashion that personally suits you best, it isn’t all that easy to become a success when you have to start from scratch. Find a niche that matches your expertise, and work hard to establish yourself. You might be your own boss, but make sure that you are still a top-notch professional in order to beat the competition and move ahead in your career.

Why Manufacturers Use Precision Machining

Many of us are unfamiliar with the precision machining process. However, most of the things we use everyday are made up of intricate and delicate parts made through this process. Whether big or small, simple or complicated, there are many things in our homes and offices with essential cogs made through this process. Our cell phones and modern appliances are just some of the few examples. The process is used to make precision components made of glass, bronze, graphite, steel, or plastic.

What differentiates precision machining from other processes? This process utilizes certain tools like lathes, drill presses, saws, grinders, and milling machines. These tools are run, operated, and controlled by computers. The result is precision work, exact, unerring, and accurate – with very little margin for slip-up. Because of the high-precision method, the components produced are exactly the same. Although a batch may be small if a client specifies it to be so, the process also allows for high-volume production.

The process allows exceptional productivity which is not possible with manual machining. With machines functioning through computer numerical control, you get outstanding precision, greater output, and very little wastage of material.

Many manufacturers depend on precision machining for many of the components they use to fabricate their products. This state-of-the-art technology is used by the aerospace, automotive, medical, dental, and military and other similarly high-tech industries. The end-products of precision machining are important precision components without which these industries cannot produce their own merchandise.

The best precision machining companies use only highly-specialized equipment and systems unmatched in efficiency. The discriminating use of the best resources enables them to handle high-volume production capably with short turnaround time. They employ quality assurance inspectors to make certain that the components they produce meet the most stringent quality requirements.

Like any other sophisticated modern technology, this process has its down side. It is more expensive than manual machining. A bigger investment is needed initially. The machines require regular maintenance by skilled service technicians.

There are definite advantages to the process, however. You can produce even tiny, highly-intricate, multi-faceted, three-dimensional components using precise contour machining. Engineering and manufacturing ambitious complicated components is no longer implausible. You have greater flexibility when it comes to the type of components you need for your end-product. You can now have products which are high precision, close tolerance, and top quality. Because the machines are controlled by powerful software programs, you get highly accurate results which are not possible to manufacture with machines which are operated manually.

Charles works for a precision machining company in Norfolk. When he is not at work, he enjoys writing articles and blog posts featuring different tips to do with CNC engineering.

Which Motor Oil Is Right For Your Vehicle?

While motor oil is used in many different kinds of engines, we most often think of using it in our automobiles. Whether you change your oil at a dealership, in specialty business, or in your own garage, you will need to determine what kind is best for your car. It can make a big difference in how long your car’s engine will last.

Types of Oil

Consult your owner’s manual for the recommended viscosity (5W-20, 5W-30, 10W-20, etc.). You may also want to talk to a professional about the best choice for your vehicle, given your driving habits and the typical operating conditions for the area. Next, you’ll have to decide the type of motor oil you would like in your car.

Conventional: This type is used most often by dealerships and service companies. It is also the least costly. Most don’t have many other additives that may benefit your engine. If you are diligent about keeping your oil changed, about every three months or 3,000 miles, this kind should be fine.

Premium Conventional: Most new cars will be serviced with this type. It is available in the most common viscosities that are appropriate for nearly every light-duty vehicle.

Full Synthetic: This type is made for high-tech engines. They are rigorously tested to ensure they have a better, longer-lasting performance, including:

- Protection against engine deposits
- Enhanced flow at low temperatures
- Greatest lubrication at high temperatures

This type is more expensive than conventional, and not all engines need it. Refer to your owner’s guide, and if it doesn’t recommend this type, it may just be an additional cost that doesn’t add that much value to your engine.

Synthetic Blend: As the name suggests, this type is actually a blend of conventional and synthetic. It is designed to give the engine better protection during heavier loads and higher temperatures. It is frequently used in trucks and SUV’s. Even though there is the synthetic component, it does not cost much more than premium conventional types.

High Mileage: Once your vehicle has more than 75,000 miles on the engine, you may want to consider a motor oil designed for that purpose. This type is formulated with seal conditioners that help to keep the internal engine seals flexible.

Oil Additives

Once you’ve chosen among these different types, you will find there are additives that may be included to address specific engine performance conditions.

Detergents: These are designed to prevent high-temperature deposits, rust, and corrosion. They may even help remove some existing deposits.

Anti-Wear Additives: As the motor oil breaks down, it forms a film. These additives help protect the metal surfaces of your engine against that film.

Viscosity Index Improvers: Oil has a tendency to thin as the temperature increases. This additive reduces its ability to do that.

Foam Inhibitors: The crankshaft rotation causes foaming, which doesn’t lubricate as well. This additive disperses the foam.

Friction Modifiers: These additives reduce the friction in the engine, which results in improved gas mileage.

When it comes to motor oil for your vehicle, it’s best to start with the recommendation from your owner manual. Talk to your dealership or other service professionals about your particular driving habits and vehicle history. They can help you choose the product that’s right for your situation, in order to keep your vehicle running smoothly for as long as possible.